Wednesday, December 1, 2010

Irrigation controller

The irrigation control box between holes #2/7 has been moved 30 feet and elevated roughly 42 inches due to past flooding and the low elevation.  We began by digging a trench to run the wires. Next we had to splice all the irrigation control wires/electrical wires and ran them through a 4 inch solid pipe to the new location of the control box.  After moving the concrete pad and connecting the control box, we then connected the new wires to their proper location.  This change will prevent future flood damage to the electrical components.







1 comment:

  1. That lookls like one great big mess. Glad im not the one to figure out where all those go.

    ReplyDelete